This guide explains configuring Quicklaunch to display on multiple screens. There are two layouts available, Flat and Tabbed. The Flat layout is more of a classic look and is suitable for large displays. The Tabbed layout is optimized for use with a small touchscreen/console.


Contents

1) Configuring a Flat Display

2) Configuring a Tabbed Display

3) Video



1) Configuring a Flat Display

  • Add a new screen: Select the plus sign (In the box to the left) 
  • Layout: Select Flat or Tabbed layout for the new screen.
  • Behavior: Select for Flat: Dynamic, Fixed or Pinned (PE Does Not have "Pinned" Option). For tabbed select: Dynamic or Fixed 
    • Dynamic: When in Dockview Quicklaunch menu will not show and the Appbar to the right will show.

    • Fixed: When in Dockview the Quicklaunch menu will show as well as the Appbar. 
    • Pinned:  This setting gives you the option to minimize Quicklaunch into the task bar or Shrink Quicklaunch.

  • Layer: Select Normal, Always on Bottom or Always on Top
  • Room Name Location: Select where the Room Name is located. 
  • Show Virtual Keyboard: If enable "Show Virtual Keyboard" it will switch the console to keyboard mode. Show either windows or tablet keyboards. 
  • Lockdown Mode: If enabled and set to Lockdown mode Quicklaunch will hide taskbar when displayed on bottom. 




2) Configure a Tabbed Display

  • Visibility:  Select what will show on the Left Navigation Bar, Right Navigation Bar and Windows Button.
    • Left Navigation Bar: Select from the list below what will show on the left Navigation bar. If one option is not selected, It will not show.
    • Right Navigation Bar: Select from the list below what will show on the Right Navigation bar. If one option is not selected, It will not show.

    • Windows Button: This setting will only show on the Left navigation Bar if selected. Windows, Is an option to control your open windows through Quicklaunch. Select which buttons will show. 

    • Default Virtual Touchpad: 

    • Layer: Select Normal, Always on Bottom or Always on Top

    • Show Logo: At the bottom of the left navigation bar, There is a Quicklaunch Logo. This setting will add a logo to the top of bar.


    • Layer: Select Normal, Always on Bottom or Always on Top

    • Lockdown Mode: If enabled and set to Lockdown mode Quicklaunch will hide taskbar when displayed on bottom. 

3) Video